Article overview

Help article

Cloning your VPS to a new VPS

By cloning a VPS it is possible to make an exact duplicate of your VPS on a new VPS (i.e. of the hardware and software).

You're also offered the option to geographically seperate your services during the cloning process. While cloning your VPS, you can choose in which availability zone you'd like to place your VPS clone. VPS cloning is done by following the steps below.

  • A VPS with an active 'lock' can not be cloned.
  • A VPS which uses a web control panel licence to operate (for example pre-installed images with DirectAdmin, Plesk or cPanel) can also be cloned and a new license will be added to the cloned VPS. You may have to sync the license data before the clone can use the new license.
  • VPS-Firewall configurations in the control panel are also transfered.
  • If the original VPS has a Big Storage attached, remove the Big Storage in /etc/fstab before making the clone, or the clone won't start as it can't find the Big Storage.
  • It is not possible to clone an existing VPS to a smaller VPS (except for an X16 to an X8).
  • If you configured the IP addresses on your VPS statically, you will not be able to use the network-connectivity of the new VPS yet as it will also copy the network-configuration. Because you can not use the original IP addresses, you need to first manually alter the network-settings and configure the IP address(es), to allocate the new IP addresses and remove the existing ones from the new VPS. In this article you'll find an instruction for configuring static IP's in Linux and in this article for Windows.
  • Cloning has no impact on services on the old VPS, such as Big Storage. It'll remain attached and usable.
  • It is strongly recommended to disable the VPS before you create a Snapshot. This prevents that data which was still stored in the RAM and data that is still written during the snapshot is not included in the snapshot (with possible corruption as a result).
  • The 'go to production' option for SandboxVPS is effecitvely the same as a clone process.
  • Cloning a BladeVPS or PerformanceVPS with control panel to a SandboxVPS is unsupported.

Step 1

Log in to your control panel, navigate to the 'BladeVPS' tab and click the name of your VPS on the left.


 

Step 2

In the top right, click on 'Manage', followed by 'Clone'.

 


 

Step 3

Select the type of VPS you'd like to use. Please note that you cannot clone to a VPS with a disk size smaller than the original VPS.

choose vps package


 

Step 4

Click on 'Configure' under the size of VPS you'd like to clone the VPS as. By clicking on 'More performance' in the bottom you can also choose a larger VPS in case of a BladeVPS and PerformanceVPS.

vps choose clone package


 

Step 5

You're now shown the availability zones you can clone the VPS to, as well as availability-zone that hosts the original VPS. Click 'Choose' behind the availability zone you'd like to clone your VPS to.

choose clone availability zone


 

Step 6

Click on 'Order' to finalize and order the clone of your VPS.

Depending on the size of the original VPS, it can take some time before the new, cloned VPS can be used. However, it should however be listed in the VPS overview after a few seconds.


 

Should you have any questions left regarding this article, do not hesitate to contact our support department. You can reach them via the ‘Contact Us’ button at the bottom of this page.

If you want to discuss this article with other users, please leave a message under 'Comments'.

Has this article been helpful?

Create an account or log in to leave a rating.

Comments

Create an account or log in to be able to leave a comment.